3 Ft, Satin Black, Single Deep
Item#WIRE-SB-3FT-1DP
Specifications & Resources
Condenser:
Voltage | 230/208-60-1 |
Ampacity Max. | 8.7 |
Fuse Min. | 15 |
RLA/LRA | 6.5/35 |
dB | 53 |
- 5/16" x 5/8" line set up to 200 equivalent feet. See the installation sheet for line set sizing up to 200 equivalent feet maximum.
- Unit is not pre charged and must be evacuated
- For use with R-134a refrigerant.
- Dimensions:
Indoor Unit: 25" x 20 " x 18 1/2" 100 lbs.
Outdoor Unit: 25 1/2" x 20" x 20" 126 lbs.
Wall Mounted Evaporator:
Voltage | 208/240-60-1 |
Motor Output Max. | 48 Watts |
dB | 42 |
- Receives load voltage from condenser
- Drain line is 5/8" barbed
- Dimensions: 42 5/8" W x 12 3/8" H x 9" D 31.8 lbs.
Thermostat:
- PRO1 or Peco 12532 if ordered with humidifier
- 18-gauge 5 wire to the condenser
Approximate Shipping Weight:
- 279-327 lbs.
Crate Size: 36" x 49" x 44" T
Ductless Split System
-
Applications:
- Most economical split system to purchase and install
- Allows transfer of heat to a room not adjacent to cellar
- This unit is perfect for both long storage as well as commercial applications where the wine will be turned over quickly
- For rooms already constructed, rooms with concrete or brick walls, and rooms without space for ducting
- For cellars without access to a mechanical room to house an air handler
- Can be used with either an indoor or outdoor remote condensing unit, moving heat and noise away from the cellar
- Extremely quiet, attractive, wall mounted evaporator
- Attractive, 24V digital thermostat with large display controls the system
- Must be installed and adjusted by a qualified HVAC technician Ductless Evaporator:
- Low noise evaporator fan and remote condenser design
- Economical way to cool, even where installing ductwork is impractical or impossible
- Requires only one small hole through wall to run lines for refrigerant, electric and condensate drain
- Washable filters
- Stylish grille cover is easily detached and cleaned Indoor condenser:
- UL listed Copeland® commercial condensing unit.
- Uses R-134a refrigerant
- Air cooled units standard
- Receiver for use with thermostatic expansion valve
- 4" galvanized iron base
- Variable speed fan control
- Crankcase heater on all models
- UL listed Copeland® commercial condensing unit.
- Uses R134a refrigerant
- Air cooled units standard
- Receiver for use with thermostatic expansion valve
- Rainproof control panel box with liquid tight conduit on control panel
- Low ambient controls
- Variable speed fan control
- Crankcase heater on all models Outdoor Condenser
- UL Listed enclosure
- Galvanized steel base
- 20 GA. Galvanized steel cabinet
- Hinged access for easier servicing
- Wind safety latch
- All season weather protection
- Front louvers at 45° angle
- Rain trough under hinge to catch moisture that might seep through hinge
- Condenser screen protected with high temperature baked-on clear lacquer coating
- Attractive styling complements any décor
- Large display for easy readability
- Keys are located by the display for easy access
- Easy installation, setup and self test saves installer time
- Set points permanently held in memory and are retained during power outages
Outdoor Condenser:
Outdoor Enclosure:
Honeywell® Thermostat:
It is your responsibility to check the condition of the unit and other parts the day you receive it. Please inform us about any anomalies as soon as possible, you have up to 7 days to inform us so we can file a claim. Outside of this timeframe any replacement will have a cost. Decline the delivery of the unit if it was damaged in transit or accept the delivery but get the shipping company to sign the paperwork as damaged in transit, get a copy or take a picture and contact us the same or next business day.
Return Policy
WineZone Refrigeration systems are made to order.
All customer requested returns are subjected to a 25% restocking fee plus transit fees both ways, no exceptions,
take pictures of the unit before returning it, and must be unused-never installed. You have 90 days to return
it. No returns accepted after 91 days from ship date.
The Purchaser must contact their design consultant to initiate a return, obtain an RMA#, and have Call Tags issued for the return of the unit.
Cancellation Policy
You may cancel your order at any time as long as the order has not already shipped without penalty as long as
your order is for our standard wall mount units with either an indoor or outdoor air cooled condenser. If you
have ordered a unit with a water-cooled condenser, coil coating, ceiling mount evaporator, or other non-stock
items then you will be charged the portion of the order that relates to the cost of the custom ordered items
that cannot be returned to stock. Your credit amount will be determined at time of cancellation.
- Cable Racks: 1 Week
- Glass and Cable: 1-2 Week
- RevueVino: 1 Week
- Whisperkool units: 1-2 Week
- CellarPro units: 1-2 Week
- Breezaire units: 1-2 Week
- Wine Guardian units: 1-2 Week
- WRR units: 1-2 Week
- Classic Kits: 3-4 Week
- Carpenter Kits: 3-4 Week
- Deluxe Metal Racks: 3-4 Week
- Modern Racks: 4-6 Week
- Glass Entryways: 4-6 Week
- Wooden Doors: 6-8 Week
- Metal Doors: 8-10 Week
- Vintner: 10-12 Week
- Custom: 12-14 Week
Shipping Costs:
Some of our products have free shipping, while others have specific S&H charges. For those with free shipping note the Free Shipping applies only to the 48 contiguous states in the United States and APO addresses. Shipments to Alaska, Hawaii, island locations such as Martha's Vineyard that require a ferry to reach, and international shipments will most likely be subject to additional shipping. International shipment will most likely also incur duties and taxes.
Shipping Methods
Wine Rack Concepts uses various shipping methods to ensure that your racking and other purchases arrive to you when you need it, and free from damage. We utilize several different shipping carriers depending on your order size and where we are shipping your order to. Some of the carriers we choose to use are as follows, but not limited : Fed Ex, UPS, AIT, ABF, Seko, & Yellow. You will receive an email confirmation from us once your order has shipped from our facility advising you of the carrier and the tracking information, so you can plan for your delivery accordingly.
The following is for reference of larger orders or custom wine cellars:
Maximum Protextion of Your Order
Our custom cellars are boxed in corrugated with corner protectors,
then stacked onto skids. The skids contain aprons around the perimeter
as shown to minimize damage from fork lifts while being moved around
shipping terminals and on/off the trucks. The vast majority of custom
cellars ship via common carrier.
Basic Delivery
Means we ship via a 53' foot semi-trailer that will arrive at your residence and the driver will open the back of the truck and step aside for the assigned party on your end to unload it. If the basic service does not fit your needs we also have a host of additional services listed below that you can choose from for an additional cost.
Customer pickup
Means that the client will be contacted when their product is completed and then we will arrange a mutually agreeable date and time for the product to be picked up.
Third party shipping
Means the customer has their own shipping company and is going to arrange for delivery of the product to their final destination at their expense. Wine Rack Concepts will need a completely filled out Bill of Lading at least 24 hours prior to the scheduled pick up date of the product. Product will be loaded on skids and customer will be charged a skid fee of $75 per skid. Client will be notified when their order is complete and ready for pick up and then we will arrange for a mutually agreeable date and time for the product to be picked up.
Inside Delivery and lift gate service
Means that the carrier will remove the product off of their truck and deliver it into your garage or the first room that is past the threshold of your residence or place of business. Lift gate service is required for them to take the product off the truck due to the length and weight of our product.
Gated community
Needs to be marked if you live in one as there are only a limited number of specialty carriers who are willing to make deliveries to these communities due to the extra work involved in clearing a time for delivery and getting the clearance with security.
Small truck
Is required if a 53' long semi trailer will not be able to make a delivery to park in front of your home or in your driveway at the time of delivery.
Two man delivery service
Will be needed if we are shipping product this in excess of 70 pounds per box or if you have requested delivery of your product inside your home to a location other than the first room pass the threshold of your residence or place of business.
Turn Key Quote
A Turn Key quote will be required if delivery is to be made to the following
- Condo
- High Rise
- Any residential area where trucking companies must use asn elevator
- If the customer wants delivery past the threshold inside the residence.
- If the drop off location is not directly off of the driveway or if the driveway is inaccessible.