CellarPro Ducted Split Air Handler 1 Ton Outdoor AH8500Sx-ECX #7110

CellarPro AH8500Sx-ECX Cooling Unit (P/N 7110). CellarPro engineered the AH8500Sx-ECX ducted cooling system to provide maximum cooling power and adjustable humidity control for cellars up to 2,500 cubic feet with the condensing unit located in an exterior environment. The evaporator and the condensing unit each can be ducted up to 100 equivalent feet (50 equivalent feet per duct.) As a split system, the evaporator can be separated from the condensing unit up to 100 feet, allowing the noise and heat from the condensing unit to be located away from interior living areas. The AH8500Sx-ECX includes independent energy-efficient variable-speed EC fans with a low setting for quieter operation and a high setting for maximum power. All air-cooled refrigeration equipment requires fresh air intake to dissipate the heat generated by the cooling unit. The fresh air intake CANNOT come from the wine cellar space - it must come from space outside the cellar.

• Energy-efficient EC Fans on both the cold and hot sides
• High-output EC fans provide more airflow and variable speed settings for your choice of cooling power
• Optional integrated humidifier
• Optional integrated heater
• Extra-large coils generate maximum cooling power inside the cellar
• Commercial-grade Electrofin coating
• Remote thermostat is available as an upgrade
• Energy-saver mode, quick-chill mode, and auto-defrost cycle
• Unit operates with minimal vibrations and less noise than comparable units from competitors.
• Audible and visual alarms
• Remote probe for the cellar (bottle probe) and duct adapters are included as standard equipment
• Factory-installed Expansion Valve ensures maximum operating precision and range.
• Cooling system is fully-charged with refrigerant and ready-to-use out of the box.

• Evaporator Dimensions:
  • 60 lbs (no humidifier)
  • 18.6w x 18.6d x 19.3h
• Condenser Dimensions:
  • 120 lbs
  • 18.6w x 18.6d x 19.3h
• Power:
  • CellarPro Air Handlers use two 110V / 60Hz plug-in power cords, as follows:
    
    • Two permanent power connections for the evaporator (2.0 amps / 15 amp circuit breaker) and the condensing unit (15.7 amps / 25 amp circuit breaker). This wiring is recommended for Valve Control configurations.
    • One permanent power connection for the entire system (25 amp circuit breaker). In this configuration, the condensing unit must be wired to the evaporator, and must be used with Electronic Control.
  • Startup Amps: 54.5 Amps
  • Running Amps Cord-Connected: 14.6 Amps
  • Total Watts: 1078 (medium fan speed)
  • 1 Ton Nominal
• BTUH @ 55F
  • Low Fan Speed: 6245
  • Med Fan Speed: 6649
  • High Fan Speed: 7156
• Evaporator Decibels
  • Low Fan Speed, Ducted: 38 dbA
  • Med Fan Speed, Ducted: 44 dbA
  • High Fan Speed, Ducted: 52 db
• Condenser Decibels
  • Low Fan Speed, Ducted / Non-Ducted: 43 dbA / 56 dbA
  • Med Fan Speed, Ducted / Non-Ducted: 50 dbA / 63 dbA
  • High Fan Speed, Ducted / Non-Ducted: 55 dbA / 68 dbA